Designer Logo's

Applicable version : 2.00 and later

Summary :
On the main screen of all the modules is a logo. This logo can be changed. The idea is that it is set to the logo of the dealer, or supplier, of the system. The goal of this document is to explain the requirements for changing the logo.

Requirements :
You will need to supply 2 graphic files, in Bitmap (BMP) format. The first graphic file should be called xxx1.Bmp and must use no more than the standard 16 colors. xxx3.Bmp should be a similar bitmap, but can contain an unlimited number (24 bit) colors.  xxx should be replaced with a unique name (no more than 6 characters) for the dealer concerned.

The bitmaps must measure 262 pixels, by 142 pixels.

The bitmaps must be placed in the Data directory on the client's machine.

Setting the Bitmap :
To set the bitmap, go to the TNA2000 Ini file and change the Logo setting.  Insert the new name here (xxx) without the trailing number or the .Bmp extension.  For example, for a bitmap set called cbs1.bmp and cbs3.bmp you would enter

Logo=Cbs

Notice there are no spaces.

Advanced :
If you send your logo bitmap files to tna2000@capesoft.com, then we will include the bitmaps into TNA2000 as resources.  This means the files are automatically part of TNA 2000, and you will not need to ship them. If you want to set the INI file to use an internal bitmap, then prefix the name with a tilde (~).  For example the above example would become:

Logo=~Cbs